In 2013, the two companies developed photoresist technology for organic semiconductors, and now they use this technology to make full-color OLED panels. Compared to Samsung's FMM and LG's WOLED, photoresist technology is very different. In addition to reducing production costs, this technology can significantly increase the pixel density and resolution of OLED panels. Currently, the pixel density of 4K TV is around 200ppi, and the 1080p mobile phone screen is around 500ppi. In contrast, even though it is still in the research and development stage, Fuji and Iequ have successfully produced OLED panels with a pixel density of 640ppi, and may reach 1000ppi in the future. According to imec researchers, with the help of this technology, smartphones can even reach 8K resolution in the future. Although the photoresist technology is still in the early stage of development, considering the 640ppi concept verification OLED panel has been successfully developed, the future development of this technology is indeed expected.
Bolt anti-loosening labeling paste provides a more intuitive and simple inspection method for loosening and tampering of bolts and nuts, with simple construction and good fastness.
It can be applied to most places with bolts (such as steam turbine, wind power blade connecting bolts, locomotive bogie and other key connecting bolts, etc.) to provide reliable torque marking scheme.
Before use,clean the surface of bolts and firmware required to be marked to ensure that there is no dust, oil, etc. Apply a continuous label between bolts and firmware until it is naturally cured. Please cover the product immediately after use to prevent the product from curing in the air and affecting the effect of next use.
Our Tamper Proof Torque Marker can be applied to most places with bolts as Torque Seal Marker(such as steam turbine, wind power blade connecting bolts, locomotive bogie and other key connecting bolts, etc.) to provide reliable torque marking scheme.
With the function of cross-check,it has good properties of Viscous coating gummy, slow drying, toluene and xylene free of low odor, easy to apply.
The curing time depends on the thickness of the coating, the dry time of the table is 30-60 minutes, and the dry time is 5-7 days.
Cross-Check,Cross Check Tamper Proof Torque Mark,Torque Seal Marker,Tamper Proof Torque Marker CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com
Although the quality of the O LED TV is amazing, the high price is not affordable for the average consumer. Recently, however, a joint venture established by Fuji and nanoelectronics research institute imec has found a low-cost method for producing high-resolution, large-size O- LED panels .