Green Alliance Wireless Charger Reviews

Wireless charging is nothing new, but with the introduction of the iPhone 8 series, everyone started to pay attention to wireless charging. It can be predicted that more and more flagships will support wireless charging in the future, which shows that Apple's role in promoting a technology development remains unabated.

The iPhone 8 series finally used the wireless charging, of course, fruit powder to experience this pleasure with the charge. However, the Belkin wireless charger that is sold by the government is too expensive, and wireless charging is still highly ridiculed at the moment, so we still choose a brand with a high cost-effective ratio. If it is idle, it will not be too distressed. Today, we evaluated Green Alliance's wireless charger for you.

Unpacking:

When I first got this product, it was a wireless fast charge that was a bit heavy to me. Green Union's charger package uses a hard paper shell material, green joint home products are mostly simple packaging. The positive center is the product's rendering. The top is the English LOGO of the Green Alliance product. The lower part of the English language is the wireless charging pad. The whole front wood has a Chinese character. If you don't know it, you think that the foreign product is imported. Haha. On the back of the package is a brief description of the product's specifications and its company, anti-counterfeiting, two-dimensional code, etc., and there is not much to say here.

This wireless charge is Green Alliance specifically for Apple ios11.2 7.5W wireless fast charge function, adding a 7.5W fixed-frequency chip design, built-in large version of the combined coil, power conversion rate can reach 80%, but also anti- Overcharge, FOD foreign object detection and other functions can make users wireless charging fast and safe.

Family portrait :

The whole is equipped with wireless charging pad, QC3.0 power adapter, USB charging cable and product manuals and warranty cards.

product details:

Green Alliance this charge pad as a whole with a zinc alloy shell with non-slip surface silicone, to avoid the mobile phone when charging sliding, in addition to product laser laser, the back there is a ring of non-slip rubber aprons, the overall black effect texture is good. This charger is 100mm in diameter and 9mm thick. The thickness is equal to the size of four one-dollar coins. The weight is not introduced by the official. I say about 290g or so. There is a certain amount of weight, and the materials are fully used.

There is a soft light on both sides of the charging pad (the indicator lights are green and blue, the blue light is on, the green light is on behalf of the charge is completed, the blue light is on behalf of charging, the green light flashes on behalf of a foreign object or cell phone Position deviation) and a Micro-USB interface.

Green Alliance to this wireless charging QC3.0 power adapter, USB output port interchangeability, output 5V3A/9V2A/12V1.5A, support for Apple fixed 7.5W fast charging and Android 10W fast charge, intelligent automatic matching, Do not hurt the phone.

product testing:

We first test the foreign object detection function of FOD. Test the phone for iPhone X and iPhone 5S (without wireless charging function). First of all, we put iPhone X first. The green wireless charging pad blue light starts to recognize the mobile phone charging, and then Into the iPhone 5S blue light flicker, test proved FOD foreign body detection function works.

Next, we tested the QC3.0 power adapter and used the ChargerLAB POWER-Z KT001 for protocol authentication. It shows support for APPLE2.4A, QC2.0, QC3.0, and USB DCP protocols. The product does not have a virtual target and performs well.

Then test the power of the wireless charger's input terminal. Test the phone as iPhone X. Charge from 48% to 100% for 1 hour, 58 minutes, and 30 seconds. The current is relatively large, the charging speed is fast, and the intermediate current reduces the power consumption. The device is equipped with an independent temperature-sensing probe, which is designed to reduce the power consumption when the temperature is too high. The battery is in a state of constant voltage charge for the mobile phone to enter the saturation state in the middle and rear, and finally enters the trickle charge mode.

In testing the wireless charger power consumption, about 0.6W, in line with the standard, but still hope that you can unplug the socket when not in use, although a bit troublesome, but it does not waste resources.

to sum up:

After a series of tests, Green Alliance's wireless charger has stood the test and is a worthy wireless charger. Its stylish appearance and its internal intelligent design can be seen in the wisdom and quality of Dachang. Compared to the third-party brand Belkin and Mophie currently authorized by Apple's official website, the price of 498 yuan, Green Alliance is only 199 yuan, Not only is there an overwhelming price advantage, but also workmanship and styling are not inferior, and cost-effective bursting.

As far as the current wireless charging is concerned, although it can only be limited to placing the mobile phone on the charger, when I believe that in the near future, it will certainly break this limitation, so that we can achieve a truly wireless charging.