Before installing the insulator, it is necessary to ensure that the insulator is in a qualified state before it can be effectively used. In the process of inspecting the insulator, it is necessary to perform detailed inspection on the flange, the iron piece, and the porcelain piece. If damage occurs, etc. These insulators can not be used normally. Only the iron parts and porcelain parts have high firmness, which can meet the needs of the use environment. At the same time, it is necessary to ensure that there is no rust in the position of the iron parts, otherwise the effect of the insulators will be affected. Installation specification—In the installation process, it is first necessary to keep the installed insulators on the same horizontal plane or vertical plane, and the insulators installed in each phase of the main busbar must keep the center line in a straight line. Only after careful installation process can the installation be completed. Ensure that the performance of the insulator is stable and achieve a good fastening effect. Avoid loosening - In the process of installing the insulator, special attention should be paid to the tightness of the insulator. If the insulator is loose, it will affect the normal fixing of the busbar, thus avoiding the looseness of the insulator installation. Safe use has an important role to play. Precautions 1. The performance of the barrier insulator is stable. During the installation, it is necessary to ensure that the pins of all the insulators are in the same direction, especially for the tensile insulator string, the steel cap must be up, and all the bowls are in the same position to meet the installation. Specification requirements. 2. The function of the insulator is special. Therefore, during the installation process, all the insulator pins must be kept in a complete state, and the spring pin needs to have good elasticity to meet the installation requirements in different environments. For insulators and bushings, in the process of installation, it is necessary to follow the basic principles of installation. Under the premise of meeting the standards, the specific use effect of the insulators can be improved, the absolute safety of the lines can be guaranteed, and the ability of the insulators to adapt to the environment can be improved.
The Vinyl Examination Gloves are single use only, disposable gloves intended for medical purposes to be worn on the hands or fingers of examiners. The gloves are powder-free, clear and are made of poly vinyl chloride. The gloves are offered non-sterile and are available in small, medium, large and extra-large sizes.
A patient examination glove is a disposable device intended for medical purposes that is worn upon the examiner`s hands or fingers to prevent contamination between patients and examiners.
Normal Packaging Specifications: 100PCS/BOX, 10BOX/CTN.
pvc glove, pvc hand gloves, pvc coated gloves, pvc gloves price, vinyl gloves Jiangmen soundrace electronics and technology co.,ltd. , https://www.soundracegroup.com
In the power system, the installation work of the insulator and the bushing is relatively common. In order to ensure that the insulator can have a long service time, in the process of using the insulator, it is necessary to protect the insulator to extend the service life of the insulator. Reduce the probability of insulator replacement.