Contact: Zhang Jie Mobile: phone fax E-mail: In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee. 1D Barcode Scanner Module,Barcode Reader Arduino,Qr Code Scanner Module,Small Barcode Scanner Module Guangzhou Winson Information Technology Co., Ltd. , https://www.barcodescanner-2d.com
Tender code: CBL_20161115_188828361
Opening time: 2016-12-05
Bulletin category: Domestic tender
Tenderee: Sinochem Quanzhou Petrochemical Co., Ltd. Source of funds: Other dates: November 15, 2016 Tender number: 0747-1660SITCK186
Under the entrustment of Sinochem Quanzhou Petrochemical Co., Ltd., Sinochem Quanzhou Petrochemical's 2016 LDAR inspection service was open to the public.
1. Source of funds: Self-financing by enterprises.
2. Bidding scope: Sinochem Quanzhou Petrochemical's 2016 LDAR testing services include but are not limited to the following:
(1) Modify, improve and update the original LDAR information management system, and the system modification scope at least includes the modification of VOC emission calculation method, insulation condition, inspection frequency, and the calculation method shall be changed according to the current “Working Guide†requirements, and must meet the local environmental protection requirements. Department requirements; change the frequency of system testing, now all default 6 months, according to the sealed point category should be changed to 3 months or 6 months; increase the collection of data parameters, such as insulation, etc.; point description accuracy needs further improvement, Ensure that the security, integrity, reliability, and functions of the original software system fully meet the requirements of Party A's use and management, or establish a new LDAR information management system, so as to ultimately ensure compliance with existing national and local laws and regulations. Standards, standards, and other requirements meet the need for regular LDAR work.
(2) According to the project needs to be responsible for the configuration of testing equipment, office equipment, labor insurance products and all consumables in the testing process.
(3) According to the tenderer's request, prepare a specific work plan for the LDAR project and submit it to the tenderer for approval and implementation.
(4) Completion of VOCs testing of all production equipment (or units) of the tenderer and retesting after repair of leakage points. And according to the actual needs of the tenderer, the test report and retest report of each device (or unit) and the general test report and retest report of all devices (or units) of the tenderer shall be issued in stages. The form of the report shall comply with the local government and corporate environmental protection departments. Claim.
(5) According to the "Guidelines for the detection and repair of leaks in petrochemical enterprises", the construction of unreachable points and new measuring points is completed, and the inaccessible points are detected by OGI infrared detector.
(6) After the completion of the inspection, according to the filing situation in 2015, the components that were dropped will be dealt with and the newly added measuring points will be listed. The inaccessible points are listed on the site using the proper location listing method. The new point to be built is about 10,000 points. The number of dropped cards is about 3,000 or so, and the bidders check the number and information of the dropped cards themselves and then take out the cards. Withdrawals and new listings are provided by bidders.
(7) Completion of the calculation of leakage emissions of all production equipment (or units) of the bid inviter and provision of emission calculation reports. The work results such as leak detection report and emission calculation report submitted by the bidder must meet the management requirements of the tenderee.
(8) Conduct LDAR management system operation training and regular maintenance work for the tenderee's personnel.
(9) Completion of other work related to the LDAR project requested by the tenderer.
3. Detection quantity: The number of LDAR sealing points and VOCs detection points of all production equipment (or units) of the tenderee shall be based on the actual statistics and the actual number of detections. The estimated total number of detection points is 130,000 (of which the reachable point is approximately 120,000 Point, inaccessible point is about 10,000 points).
4. Term of service: The tenderer shall complete all inspections within one month of the arrival of the notice and submit the qualified project results.
5. Purchase of Bidding Documents (Electronic Edition) Time: From November 15, 2016 to November 21, 2016 (8:30-11:00 am, 1:30-4:00 pm, except for rest days) The kit is priced at RMB 1,000 and will not be refunded after sale.
(Hint: If you use the telegraphic transfer method to purchase bids, in order to facilitate the timely sending of tender documents, the bidder shall indicate in the remittance postscript in sequence: the fourth place after the tender number, the purpose and the name of the bidder, such as "K186 tender AAA company")
6. Deadline for submission of bids and opening time: 9:30 am (Beijing time) on December 5, 2016. At that time, the bidder’s legal person or authorized agent will attend the bid opening ceremony.
8. Submission of bid documents: The bid documents must be sealed and delivered to the bid opening place before the deadline for submitting bids on the opening day. Late delivery or non-compliance of tender documents will not be accepted.
9. Bidding method: Domestic open bidding.
Bidding number:0747-1660SITCK186