How to clean the washing machine

If you use a washing machine for a long time in summer, it will breed a lot of dirt. Use the following methods:

First, place the washing machine drain on an empty bucket (to have a certain height), close the inlet valve and the front door.

Second, pour the water from the 3 kettles with detergent (commercially available) in an empty container and mix them with a detergent/water ratio of l/2.

Third, open the “detergent addition box” and pour the mixed detergent solution from the detergent addition box, taking care not to splash on the skin.

Fourth, press the washing machine power switch to set the program to the "laundry program" (the longest time), so that the drum rotates; after the descaling fluid is discharged from the drain pipe into the bucket, the descaling fluid will be discharged. Add it from the detergent addition box and repeat it several times until the program is finished and open the filter to clean the filter.

Fifth, after the machine is completed, the inlet valve is opened and the drain pipe is returned to its original position. Re-select the washing program to make the washing machine run again. After the program is completed, clean the filter again. At this point, the descaling is finished. After descaling is completed, the washing machine drum may be slightly darker on the surface due to the action of the descaling solution, but it will not affect normal use. After washing the clothes several times, it can be restored to its original shape.