Production Process Production Process
Is mainly used for adult health care products and toys micro vibration motor is a Dc Motor, the motor shaft with an eccentric wheel, when the motor rotation, eccentric circle particle is not turn the heart of the motor, make motor is constantly out of balance state, caused by inertial effect.
Characteristics: small volume, strong vibration;
Operating temperature range:
vibration motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a vibration motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
vibration motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Vibration Motor,Small Powerful Vibration Motor,220V Vibration Motor,Electric Motor For Vibrating Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
Height
6m to 30m or other height customer requirement
Suit for
Electric Power Distribution Transmission Steel Tower
Shape
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material
Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,
to ST52
Strength
2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion
+- 2%Â
Optical assembly of lighting fixture
  IP 65
Electroshock resistant protective grade
 Grde I
The casing anti-corrosion performance
 Class II
Working atmosphere of lighting fixture
-35 ºC~+45 ºC
 Surface treatment
  Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles
 Insert mode,innerflange mode,face to face joint mode
Design of pole
  Against earthquake of 8 grade
  Wind Speed
160km/hour
Minimum yield strength
335mpa
Minimum ultimate tensile strength
400mpa
 Max ultimate tensile strength
 620mpa
StandardÂ
ISO9001Â
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing.Internal and external double welding makes the
welding beautiful in shape.
Welding Standard :AWS (Â American Welding Society )Â D 1.1
 Thickness
1mm to 30mmÂ
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Style
Size and styles are veriable as per customer request Â
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Â
Â
Factory Show
Yangzhou Shixin Landscape Lighting company is located in Tianshan Industrial Park of Yangzhou, which is the largest and best street light manufacture in China. The company is specialized in production of street light, LED street light, solar street light, pole, high mast, garden light, lawn light and so on. We have 189 workers, 20Â technicists, and 25 serve clerks. We have been working in this line from 2004.And we have done many big projects abroad and won good reputation from our customers.
FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.Â
2.How to Choose the System Voltage  12V or 24V or for normal street Light ?Â
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . Â
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.Â
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting +Â 6 hours half power lighting)
Welcome to contact us a.s.a.p.
Contact person:Dongzhou Zhao
M.B.+8618652772323
Â
dongzhou.zhao
Â
Product Description
Height
6m to 30m or other height customer requirement
Suit for
Electric Power Distribution Transmission Steel Tower
Shape
Conoid ,Multi-pyramidal,Columniform,polygonal or conical
Material
Usually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,
to ST52
Strength
2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion
+- 2%Â
Optical assembly of lighting fixture
  IP 65
Electroshock resistant protective grade
 Grde I
The casing anti-corrosion performance
 Class II
Working atmosphere of lighting fixture
-35 ºC~+45 ºC
 Surface treatment
  Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles
 Insert mode,innerflange mode,face to face joint mode
Design of pole
  Against earthquake of 8 grade
  Wind Speed
160km/hour
Minimum yield strength
335mpa
Minimum ultimate tensile strength
400mpa
 Max ultimate tensile strength
 620mpa
StandardÂ
ISO9001Â
Length of per section
Within 14m once forming without slip joint
Welding
We has past flaw testing.Internal and external double welding makes the
welding beautiful in shape.
Welding Standard :AWS (Â American Welding Society )Â D 1.1
 Thickness
1mm to 30mmÂ
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
Style
Size and styles are veriable as per customer request Â
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Â
Â
Factory Show
Yangzhou Shixin Landscape Lighting company is located in Tianshan Industrial Park of Yangzhou, which is the largest and best street light manufacture in China. The company is specialized in production of street light, LED street light, solar street light, pole, high mast, garden light, lawn light and so on. We have 189 workers, 20Â technicists, and 25 serve clerks. We have been working in this line from 2004.And we have done many big projects abroad and won good reputation from our customers.
FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times.Â
2.How to Choose the System Voltage  12V or 24V or for normal street Light ?Â
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light . Â
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon.Â
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting +Â 6 hours half power lighting)
Welcome to contact us a.s.a.p.
Contact person:Dongzhou Zhao
M.B.+8618652772323
Â
dongzhou.zhao
Â
Features: small size, fast speed, stable performance, low price, can use battery drive,Can change the different materials of the pendulum head
Method of use: the best stable in horizontal plane, installed on the dc vibration motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc vibration motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Model NO.: SX-DG
Tc: 3500-6000k
Guarantee: 3-5years
Apply: Street, Road
Thickness: 3-5mm
Color: Customer′s Request
Diameter: 65-200
Light Source: LED Light
Color Temperature(CCT): Warm White
Lamp Body Material: Aluminum Alloy
Lamp Power: 30W
Power Supply: AC
Average Life: 5500h
IP Rating: IP65
Voltage: 220V
Trademark: xinyao
Transport Package: Canrton or as Customer′s Request
Specification: CE, SGS, CQC, ISO9001
Origin: Jiangsu, Yangzhou
HS Code: 940540900
Model NO.: SX-DG
Tc: 3500-6000k
Guarantee: 3-5years
Apply: Street, Road
Thickness: 3-5mm
Color: Customer′s Request
Diameter: 65-200
Light Source: LED Light
Color Temperature(CCT): Warm White
Lamp Body Material: Aluminum Alloy
Lamp Power: 30W
Power Supply: AC
Average Life: 5500h
IP Rating: IP65
Voltage: 220V
Trademark: xinyao
Transport Package: Canrton or as Customer′s Request
Specification: CE, SGS, CQC, ISO9001
Origin: Jiangsu, Yangzhou
HS Code: 940540900
Product Description