Proximity switches In general industrial production locations, eddy current proximity switches and capacitive proximity switches are commonly used. Because these two proximity switches have lower environmental requirements. Diesel Generating Set,Genset Generator,Independent Power Supply,Office Buildings Generator Shaoxing AnFu Energy Equipment Co.Ltd , https://www.sxanfu.com
When the object to be measured is a conductive object or an object that can be fixed on a metal object, the eddy current proximity switch is generally used because of its high response frequency, good anti-interference performance, wide application range, and low price.
If the object to be tested is non-metal (or metal), liquid level, powder height, plastic, tobacco, etc. A capacitive proximity switch should be used. This switch has a low response frequency but good stability. The environmental factors should be considered during installation.
If the object to be tested is a magnetically permeable material or to bury the magnetic steel in the object to be measured in order to distinguish it from the object moving together, the Hall proximity switch should be used, which has the lowest price.
In the case of better environmental conditions and no dust pollution, photoelectric proximity switches can be used. When the photoelectric proximity switch operates, it has almost no influence on the measured object. Therefore, it is widely used in tobacco machinery on demanding facsimile machines.
In anti-theft systems, automatic doors typically use pyroelectric proximity switches, ultrasonic proximity switches, and microwave proximity switches. Sometimes, in order to improve the reliability of recognition, the above several proximity switches are often used in combination.
Regardless of which proximity switch is selected, attention should be paid to the requirements of various indicators such as working voltage, load current, response frequency, and detection distance.